AnyTone Apollo II - RB Function; HI-CUT Function; CTCSS;DCS Encode; Unassigned Key Indication

Default: OFF
11 CALL XXX Call setting
OFF: Press CALL key will not
transmit DTMF code..
1~16: Press CALL key to transmit
DTMF code..
Default: OFF
Note: Only when current channel has store DMTF group, the Call setting will work
（Refer to DTMF MENU setting）
E. DTMF encode setting
How to enter DTMF encode setting:
1、 Long press【FUNC】key to enter main MENU interface.
short press【FP4】key. 【FP6】key or Turn channel switch to move cursor, to choose
menu group.（short press【FP5】key can fast turn page）.
2、 Press【PUSH】key to enter DTMF MENU .
3、 short press【FP4】key. 【FP6】key or Turn channel switch to move cursor to choose
wanted setting.
4、
1. DTMF: Encode setting
1、 Enter DTMF MENU, choose NO. 1 function menu.
2、 Press 【PUSH】key to enter function setting, the chosen menu value in LCD will turn
to green color.
3、 Turn channel switch to choose group.
4、 Long press【PUSH】key edit code, Yellow character stands for current editing digit,
Turn channel switch to edit it, Press【PUSH】key to edit next digit.
5、 Long press【PUSH】key or【FP3】key to confirm and exit..
2. SND-T: Transmit time setting
1、 Enter DTMF MENU, choose NO. 2 function menu.
2、 Press 【PUSH】key to enter function setting, the chosen menu value in LCD will turn
to green color.
3、 Turn channel switch to choose group, This radio has 10ms~500ms total 50 levels
available.
4、 Press【PUSH】key or【FP3】key to confirm and exit..