Need help?Do you have a question about the AnyTone Apollo II and is the answer not in the manual?
Connects the microphone to the radio unit.
Connects the antenna to the radio, with a warning about PTT.
Connects the radio to a 13.2V power supply.
Procedure for replacing the 5A, 250V fuse.
Mounting the microphone hanger.
Installing an external speaker.
Details the controls and indicators on the front panel.
Details the ports and connectors on the rear panel.
Description of the microphone and its cable.
How to power the radio on/off and mute the volume.
Operating channel switching and the PUSH key functions.
Using the FUNC key to switch function groups and access menus.
Details on the 6 programmable keys and their function allocation.
Switching between AM and FM radio modes.
Adjusting the RF gain level.
Accessing emergency channels CH9 and CH19.
Controlling the audio volume level.
Adjusting Squelch (SQL) and Auto Squelch (ASQ) levels.
Selecting the display mode between channel and frequency.
Using the scan function and managing the scan list.
Using and storing channels in memory.
Operating the dual-watch feature.
Transmitting DTMF codes.
Activating and deactivating the Noise Blanker (NB) function.
Using the RB function.
Activating and deactivating the HI-CUT function.
Setting up CTCSS/DCS encode.
Indicates keys that are not currently assigned a function.
Procedure for accessing the background function menu.
Adjusting the beep sound settings.
Configuring the Time-Out Timer (TOT) settings.
Adjusting the backlight brightness level.
Setting the overall volume level.
Adjusting the squelch sensitivity level.
Adjusting the automatic squelch (ASQ) level.
Adjusting the RF gain settings.
Selecting the display mode for channel or frequency.
Configuring key function group settings.
Selecting the scan method (Squelch or Time).
Setting the scan exit time.
Configuring the automatic power-on feature.
Performing a Standing Wave Ratio (SWR) test.
Resetting the device to factory default settings.
Procedure for accessing the public data function menu.
Procedure for accessing the channel function menu.
Procedure for accessing the DTMF encode settings menu.
Configuring DTMF encode settings and codes.
Setting the transmit time for DTMF signals.
Setting the time delay for the first DTMF digit.
Setting the pre-loading time for DTMF transmission.
Setting the delay time for DTMF codes.
Configuring the D function key settings.
Configuring the display settings for DTMF codes.
Procedure for accessing the self-define key settings menu.
To Next Page
General
