AnyTone Apollo II - FUNC Key Usage; Programmable Keys P1-P6; AM;FM Mode Selection; RF Gain Adjustment

7
6.03
1.Short to switch between 3 groups of self dene funciton keys.
2.Long press
to enter background function menu.
6.04 [P1]~[P6]
This radio has 6 self define keys , , , , , , each key can set 3
functions.
P1~P3 matching the 3 function display in left side LCD, P4~P6 matching the functions
display in the right side of the LCD; Please refer to KEY MENU operation to allocate key
functions.
6.05 MOD: AM/FM mode
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as MOD function, the LCD displays
MOD:XX.
3.Short press it again or turn channel switch to switch between FM→AM.
4.Press [PUSH] key or key to store setting and exit.
6.06 RFG: Adjust RF gain
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as RFG function, LCD displays
RFG: XX.
3.Short press it again or turn channel switch to adjust RF gain level.
4.Press [PUSH] key or key to store setting and exit.
Note: When RFG is ON, LCD will display the level accordingly.
6.07 EMG: CH9/CH19
1.Short press key to choose programmed function group..
2.Short press the programmable key which allocated as EMG function, first press is
choose CH9.
3.Short press it again, will choose CH19.
4.Short press it third time, will return to last normal channel.
MIC
P1
FUNC
P4
P5
P6
P2
P3