AnyTone Apollo II - DTMF Encode Setting; Accessing DTMF Encode Settings; DTMF Encode Configuration; Transmit Time Setting

16
How to enter DTMF encode setting:
1.Long press key to enter main MENU interface.
2.Short press
key, key or Turn channel switch to move cursor, to choose menu
group.(Short press
key can fast turn page).
3.Press [PUSH] key to enter DTMF MENU .
4.short press
key, key or Turn channel switch to move cursor to choose wanted
setting.
10.01 DTMF: Encode setting
1.Enter DTMF MENU, choose NO. 1 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group.
4.Long press [PUSH] key edit code, Red character stands for current editing digit, Turn
channel switch to edit it, Press [PUSH] key to edit next digit.
5.Long press [PUSH] key or
key to conrm and exit..
10.02 SND-T: Transmit time setting
1.Enter DTMF MENU, choose NO. 2 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has 10ms~500ms total 50 levels
available.
4.Press [PUSH] key or
key to conrm and exit.
10.03 FIR-T: First digit time setting
1.Enter DTMF MENU, choose NO. 3 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has 0~1000ms total 11 levels
available.
4.Press [PUSH] key or
key to conrm and exit.
10. DTMF ENCODE SETTING
10.04 PRE-T: Pre-loading time setting
1.Enter DTMF MENU, choose NO. 4 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has 100ms~2500ms total 25 levels
available.
4.Press [PUSH] key or
key to conrm and exit.