AnyTone Apollo II - Fuse Replacement; Microphone Hanger Installation; External Speaker Installation

4
4.05 Intall Microphone hanger
4.06 Intall external speaker
1. Choose idea location and mark for screw point.
2. Fix the hanger by the srews in accessory list.
This radio adopt 4-8 ohm, 4W external speaker.
1. Install the external speaker in idea location.
2. Plug in the seaker connector into jack.
E
X
T
S
P
A
N
T
4.04 Fuse replacement
This radio adopt 5A, 250V fuse
1. Open the fuse holder
, 250V FUSE
IN-LINE
FUSE HOLDER
2. Replace the fuse and screw on the holder.
FUSE
IN-LINE
FUSE HOLDER
IN-LINE
FUSE HOLDER
IN-LINE
FUSE HOLDER
5A