10
6.16 RB: RB function
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as RB function, LCD displays
RB:XX.
3.Short press it again or turn channel switch to choose RB group
4.Press [PUSH] key or key to store setting and exit.
6.17 HIC: HI-CUT function
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as HIC function, LCD displays
HIC:XX.
3.Short press it again or turn channel switch to switch between ON→OFF.
4.Press [PUSH] key or key to store setting and exit.
6.18 TSQ: CTCSS/DCS encode (optional)
1.Short press key to choose programmed function group.
2.Repeatedly short press the programmable key which allocated as TSQ function , LCD
displays TSQ:XX.
3.Short press it again or turn channel switch to switch between ON→OFF.
4.Press [PUSH] key or key to store setting and exit.
6.19 XX: The current key not setting function.
How to enter function menu:
1.Long press key to enter SELECT MENU interface.
2.Short press
key, key or turn channel switch to move cursor, to choose menu.
(Note: short press
key will fast turn menu page).
3.Press [PUSH] key to enter FUNC MENU .
4.Short press
key, key or turn channel switch to move cursor to set for choose
function.
7.01 BEEP: Beep sound
1.Enter FUNC MENU, choose NO. 1 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.turn channel switch to choose wanted setting.
4.Press [PUSH] key or key to conrm and exit.
7. BACKGROUND FUNCTION MENU OPERATION
»
This function is available only when install Optional CTCSS board. To enable TSQ
function, Please set CTCSS/DCS code in the channel function menu first.refer
page 15 of CTCSS/DCS encode setting for details.
To Next Page
Loading...
Need help?
General
