Need help?Do you have a question about the AnyTone APOLLO I and is the answer not in the manual?
Explains how to connect the microphone to the radio unit.
Guides on connecting the antenna, with important notes on PTT usage.
Instructions for connecting the radio to a 13.8V power supply.
Steps for replacing the internal fuse in the CB radio.
Describes how to mount the microphone hanger.
Instructions for connecting an optional external speaker.
Details on plugging in an earphone for private listening.
Steps for connecting a remote Push-To-Talk cable.
Instructions on how to turn the CB radio on and off.
Configuration steps for enabling the automatic power-on feature.
How to change channels using the UP/DN keys.
Guide to selecting the correct radio norms for your region.
Adjusting the audio volume and squelch levels on the radio.
How to temporarily mute the speaker output.
Adjusting the squelch level to reduce background noise.
Activating and using the Automatic Squelch Control (ASQ).
Explanation of the information shown on the radio's LCD screen.
Switching between AM and FM transmission modes.
Procedure for transmitting a voice message using the microphone.
How the radio operates when receiving signals.
Setting the Time Out Timer to limit transmission duration.
Instructions for changing the color of the LCD display.
Enabling or disabling audible voice prompts for functions.
Accessing emergency channels CH9 and CH19.
How to lock the keypad to prevent accidental key presses.
Switching between frequency display and channel display modes.
Initiating and stopping the automatic channel scanning function.
Storing frequently used channels into memory slots.
Retrieving stored channels from memory.
Setting up channels for the Dual Watch function.
Activating and using the Dual Watch feature.
Restoring the radio to its original factory default settings.
To Next Page
General
