HOW TO USE THIS RADIO
Power on radio
Automatic Power on
Channel control
Choose Norms
1. Hold key until LCD light on.
Note: Before using, check if the working frequency and Norms are valid in your country.If
not, change the norms according to following instruction. The radio is defaulted set on
EUH (AM/FM 4W). The norms list see page 12.
1. Short Press
key, F Icon appear and ashes.
2. Short Press
key to enter Menu.
3. Repeatly short press
key until LCD displays
BAND: XXX
4. Press
or to choose the norms
5. Short press any other key to conrm and exit.
Note
:
When the radio in on, Hold key until LCD light off, the radio will power off.
2. Adjust squelch level until you can hear background noise, refer to Page 7 about
Squelch level setup.
3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup.
1. Short Press
or key to choose
Channel.
2. Hold
or key to choose channel fastly.
DN
POWU
P
1. Short Press key, F Icon appear and ashes.
2. Short Press
key to enter Menu.
3. Repeatedly short press
key until LCD displays
POR: XXX
4. Press
or to choose POR: ON.
5. Short press any other key to conrm and exit.
Repeat the above operation will turn off Automatic power on.
To Next Page
Loading...
Need help?
General
