LCD display
FM/AM Mode
Func
M1-M4:
storage location
Scan
Volume level,
SQ:11 Squelch level
RX signal strength,
PWR: TX signal strength.
Current Voltage
Working norm
Current channel
1W/4W: Power level
CH9/19
Dual watch
ASQ
AM/FM mode
1. Short press key to switch between AM/FM
mode.
2. Corresponding mode will displayed in the LCD.
Keypad lock icon
Dot matrix LCD display for channel number, frequency and operations.
2 Digits for display of channel number and Norms
5 Digits for display of frequency and Norms
Transmitting
1. Hold [PTT]key, TX LED indicator light on.
2. Hold the microphone about 2 cm away
from your mouth and speaker in a normal
tone.
3. Release [PTT] the radio turn to RX mode
TX LED indicator light off.
Receiving
The radio will keep in TX mode when it is not
transmitting, the RX LED indicator will light
on.
To Next Page
Loading...
Need help?
General
