AnyTone Apollo II User Manual

17
10.06 D-FUN: D function key setting
1.Enter DTMF MENU, choose NO. 6 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has D~16S total 17 levels available.
4.Press [PUSH] key or
key to conrm and exit.
10.07 DISP: Code display setting
1.Enter DTMF MENU, choose NO. 7 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose setting:
ON: When transmitting DTMF code, LCD displays corresponding setting.
OFF: When transmitting DTMF code, LCD not display corresponding setting.
4.Press [PUSH] key or
key to conrm and exit.
1.Long press
key to enter main MENU interface.
short press
key, key or Turn channel switch to move cursor, to choose menu
group.(Short press
key can fast turn page).
2.Press [PUSH] key to KEY MENU .
3.Turn channel switch to choose wanted function
4.Short press [PUSH] key to choose Key function group.
5.Short press P1~P6 keys to choose the key for allocated the function.
6.Press
key to conrm and exit.
11. SELF-DEFINE KEY SETTING
10.05 DELAY: #. delay time setting
1.Enter DTMF MENU, choose NO. 5 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has 0~1000ms total 4 levels available.
4.Press [PUSH] key or
key to conrm and exit.

AnyTone Apollo II Specifications

General

Brand	AnyTone
Model	Apollo II
Category	Radio
Language	English