AnyTone Apollo II - Microphone Connection; Antenna Connection; Power Connection

3
4.01 Microphone connection
1. Plug microphone connector into jack.
2. Pull on the dustproof cover for microphone connector.
4.02 Antenna connection
4.03 Power connection
1. Screw on the antenna into antenna jack.
2. To make full use of this radio, it is necessary to locate the antenna in a well
grounded place, and well adjust the SWR.
* Please enquiry the local dealer for choosing and intallation of suitable antenna.
This radio adopt 13.2V power supply.
Connect the red wire to the positive terminal of the battery, and the black wire to the
negative terminal of the battery.
E
X
T
S
P
A
N
T
MIC
P1
FUNC
P4
P5
P6
P2
P3
MIC
P1
FUNC
P4
P5
P6
P2
P3
»
Never press PTT before install the antenna, it might burn the transistor.