AnyTone Apollo II - Volume Level Control; Squelch and ASQ Level Adjustment; Display Mode Selection; Scan Function and List Management

8
6.08 VOL: Volume level control
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as VOL function, LCD displays VOL:
XX.
3.Turn channel switch to adjust volume level.
4.Press [PUSH] key or key to store setting and exit.
6.09 SQL~ASQ:
Short press: Squelch level control
1.Short press
key to choose programmed function group.
2.Short press the programmable key which allocated as SQL function, LCD displays SQ:
XX.
3.Turn channel switch to adjust S level.
4.Press [PUSH] key or key to store setting and exit.
Long press: ASQ level control
1.Short press
key to choose programmed function group.
2.Long press the programmable key which allocated as ASQ function, LCD displays ASQ:
XX.
3.urn channel switch to adjust ASQ level.
4.Press [PUSH] key or key to store setting and exit.
5.Long press the programmable key again to turn on SQL function.
6.10 DSP: Channel/Frequency display mode.
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as DSP function, LCD displays
DSP:XX.
3.Short press it again or turn channel switch to switch between CH→FRQ.
4.Press [PUSH] key or key to store setting and exit.
6.11 SCAN~ SCAN ADD:
Short press: Turn on scan function
1.Short press
key to choose programmed function group..
2.Short press the programmable key which allocated as SCA function, LCD displays"1S1".
3.During scanning, turn channel switch to change scan direction.
4.Press [PUSH] key or key exit scan.
Long press: add/delete scan list
In channel mode, Long press the programmable key which allocated as SCA function to
add or delete channel from scan list.
1. When the LCD displays "S" means current channel is in scan list.
2. When the "S" disappear, means current channel is deleted from scan list.
»
This function is same as the channel menu 2 control.