AnyTone Apollo II - RF Gain Settings; Display Mode Settings; Key Function Group Settings; Scan Method Selection

12
7.07 RFG: RF gain
1.Enter FUNC MENU, choose NO. 7 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose wanted level, This radio has AU. OFF~30 total 12 levels
available.
AU: Turn on automatically RF gain control.
OFF~30: Turn on RF gain control, each level stands for attenuated level.
4.Press [PUSH] key or key to conrm and exit..
7.08 DSP: Channel/frequency display mode
1.Enter FUNC MENU, choose NO. 8 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose wanted setting..
4.Press [PUSH] key or key to conrm and exit..
7.09 KEYS: key function group setting
1.Enter FUNC MENU, choose NO. 9 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose wanted setting. This radio has 1/2/3. 1/2. 2/3. 1/3 total
4 combinations available.
4.Press [PUSH] key or key to conrm and exit..
7.10 SCM: scan method
1.Enter FUNC MENU, choose NO. 10 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose wanted setting.
SQ: Squelch scan.
TI: time scan.
4.Press [PUSH] key or
key to conrm and exit..
7.11 SCRT: scan exit time setting
1.Enter FUNC MENU, choose NO. 11 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose wanted setting. This radio has 5S~30S total 6 levels
available.
4.Press [PUSH] key or key to conrm and exit..