AnyTone MINI CB - Page 3

Note：When RFG function is on the LCD displays R if RFG level is 6 means the
attenuation is 6dBm.
Note：In lock Mode all keys except PTT is valid.
Scan function
RF Gain contro
Emergency Channel
Keypad Lock
Norms control
Install external speaker
Resume factory default
Hold
1.
to start scan function, "SC" falshes in the LCD;
Press [
2.
UP ] or [ DN ] to change scan direction during scan;
Press
3.
or [PTT] key to exit scan function.
Short press
1.
key, LCD displays R and the present RF gain level ashes.
Short press microphone [
2.
UP ] or [ DN ] to change level.
Short press
3.
key to exit RF gain level control.
Short press
1.
key to choose CH9, the channel number ashes.
Short press
2.
key again to choose CH19, the channel number ashes.
Short press
3.
key third time to return to last normal channel.
Hold
1.
key for over 2 seconds to lock the keys, LCD displays "LC".
Hold
2.
key for over 2 seconds again to unlock the keys, LCD displays OF.
Hold
1.
to power on radio, until LCD displays the norms;
Press [
2.
UP ] or [ DN ] to choose wanted norms;
Power off and power on again.
3.
Choose a 8Ω external speaker with 3.5mm mono connector.
Hold
1.
key to power on radio, until the LCD displays "RT", the resume work
nish.
All channel and function setting will resume factory default after above operation.
2.