To Next Page

To Previous Page

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1. HDMI

2. Analog (D-Sub 15-Pin VGA cable)

3. Earphone

4. Power

Connect to PC

1. Connect the power cord to the back of the display rmly.

2. Turn o󰀨 your computer and unplug its power cable.

3. Connect the display signal cable to the video connector on the back of your computer.

4. Plug the power cord of your computer and your display into a nearby outlet.

5. Turn on your computer and display.

If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.

To protect equipment, always turn o󰀨 the PC and LCD monitor before connecting.

Questions and Answers:

Need help?

Do you have a question about the AOC 27B1H2 and is the answer not in the manual?

AOC 27B1H2 Specifications

General

Pixel pitch	0.3114 x 0.3114 mm
Screen shape	Flat
Response time	9 ms
Display diagonal	27 \
Display technology	LED
Native aspect ratio	16:9
Maximum refresh rate	60 Hz
NTSC coverage (typical)	82 %
Viewable size, vertical	336.31 mm
sRGB coverage (typical)	100 %
Contrast ratio (dynamic)	2000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	597.88 mm
Display brightness (typical)	250 cd/m²
HDMI	Yes
HDMI version	1.4
Headphone out	-
Input current	1.9 A
Power consumption (standby)	- W
Power consumption (typical)	23 W
Tilt angle range	-4 - 21.5 °
Product color	Black
Compatibility	BSMI / KC / KCC / e-Standby / RCM / MEPS / CE / FCC