AOC 931SW series User Manual

Service Manual AOC 931SW+
6
2. Operation instruction
Generalization
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.

The power cord should be connected.

Connect the video cable from the video card of PC to the monitor.

Press the power button to turn on the monitor, the power indicator will light up.
2.1 Control Buttons
Control Description
1
ECO mode(DCR)/ -
If there is no OSD,select the ECO mode of brightness and
DCR.
OSD, it will decrease current value of bar, or it will move to
last item of menu.
2
4:3 or wide/ +
If there is no OSD,chang 4:3 or wide image ratio.
OSD, increase current value of bar, or move to next item of
menu
3
Power Button Power ON/OFF,and power indicator(Blue and Orange).
4
Auto / Exit
If there is no any OSD, it is auto configuration.
Exit current OSD and return to last level.
5
Menu / Enter
Active main menu while no OSD display,enter next level on
main menu or sub menu status, or enter last level on
adjustment bar..

AOC 931SW series Specifications

General

Brand	AOC
Model	931SW series
Category	Monitor
Language	English