• CPC (Convex Power Control, Convex Brightness Control ) In order to reduce the risk of image retention,
it automatically adjusts the brightness gain for different screens. The brightness control follows the convex mathematical model of high in the middle and low on both sides to reduce possible image retention . This setting defaults to On and cannot be turned
off.
So please don't use this mode for a long time.
• LBC (Local Brightness Control ) In order to reduce the risk of image retention, if the cumulative average
brightness of a certain area is too high, it will automatically reduce the brightness of this area to prevent the decline of the brightness effect of this area, so as to alleviate Possible image retention. This setting defaults to On and cannot be turned off.
,
• JB ( screen compensation correction ) / OFF RS (Off Real slow, image retention elimination ) is based on the characteristics of OLED
panels. If a static image with different colors or brightness intervals is displayed for a long time, image retention is likely to occur. In order to eliminate the image retention that may have occurred, it is recommended
to repeatedly run the screen compensation correction and image retention elimination functions regularly or irregularly to obtain ideal image viewing effects.
Based on the characteristics of the OLED screen, please perform screen maintenance according to the following requirements to reduce the risk of image retention. Damages
caused by failure to comply with the following instructions will not be eligible for free warranty service.
You can use any of the following methods to run this function: • In the
OSD menu, manually enable image retention removal, and select "Yes" according to the menu prompts. • When the monitor runs for 4 full
hours, a warning message will pop up automatically to prompt the user to maintain the screen. It is recommended to select "Yes". If "No" is selected, after the monitor has run for 24 hours, the reminder will be repeated every hour until the user selects "Yes".
• Try to avoid displaying still images. A still image
refers to an image that remains unchanged for a long time on the screen in full screen or in a partial area. Still images may cause permanent
damage to the OLED screen, image retention is characteristic of OLED screens. Please observe the following usage suggestions: 1. Do not properly reduce the brightness and
contrast of the screen when any still image
is displayed in full screen or partially on the monitor screen for a long time. 2. When watching a program in 4:3 format for a
long time 3. Watch the video in full screen if possible, not in a small window on the screen
(such as a video in an Internet browser page). 4. Do not stick labels
or stickers on the screen to reduce the possibility of screen damage and image retention.
• It is recommended to use this product continuously for no more than 4 hours.
8
as this can cause image retention on the screen
This product employs the following various technologies to eliminate image retention that may occur. It is strongly recommended that you use the default values and keep each function "ON" to avoid image retention on the OLED screen and maintain the best
use of the OLED display.
To avoid this problem please display the
• LEA (Logo Extraction Algorithm , regional image retention prevention ) In order to reduce the risk of image retention, it
is recommended to enable the regional image retention prevention function. After it is turned on, the brightness of the fixed display
area at the four corners of the screen will be automatically reduced to reduce possible image retention. This setting is "ON" by default and can be set in the OSD
menu.
,
• TPC (Temporal Luminance Control ) In order to reduce the risk of image retention, when a still image is displayed for a long
time, the brightness of the image will be automatically reduced to reduce possible image retention. This setting defaults to On and cannot be turned off.
,
• Orbit ( image offset ) In order to
reduce the risk of image retention, it is recommended to enable the image offset function. After it is turned on, the
image pixels will move cyclically as a whole, and the moving track is in the shape of a "day", and the moving range is related to the strength of the setting, and it moves once every 1 minute. The moved characters may have their edges trimmed. When
Strongest is selected, image retention is least likely, but possible edge clipping is most noticeable. When "Off" is selected, the image returns to the best position. This setting defaults to "On" ("Weak") and can be set in the OSD menu.
Different marks are left on the left and right sides of the screen and the edge of the image
,
screen care
Machine Translated by Google
To Next Page
Loading...
