The monitor will automatically run the screen compensation correction first, and then run the image sticking removal. During the operation of screen compensation and calibration, please keep the power on and do not operate any buttons,
the power indicator light will flash in white (3 seconds on/3 seconds off), and this process will take about 30 seconds. When finished, the monitor then runs Image Retention Elimination. Image sticking removal
function, the whole process takes about 10 minutes. Please keep the power on, do not operate the button, the power indicator will flash white (1 second on/1 second off). After the end, the power indicator light is off or orange, and the monitor
enters a shutdown or standby state.
9
• When the monitor has been running for 4 hours in total, it will automatically perform screen compensation correction and image retention elimination after pressing the button to turn off or enter the standby state for 2 hours.
During the running process, if the user presses the power button to turn it on, the running process will be interrupted and the display screen will be restored. This process needs to wait for about 5 seconds. The monitor automatically runs the
screen compensation correction and image retention elimination functions in the standby state and cannot be interrupted. In the OSD menu "Others", you can check the number of times the Image Retention Elimination function has been
run.
Machine Translated by Google
To Next Page
Loading...
