Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection.
> Volume
When there is no OSD,Press Volume button to active volume adjustment bar, Press < or > to adjust
volume(Only for the models with speakers). Press and hold the volume > key for 2 seconds to trigger the
"image size" adjustment function to switch among different display modes like wide screen, 4:3, 1:1, 17''
(4:3), 19'' (4:3) W (16:10), 21.5'' (16:9), 22'' W (16:10), and 23'' W (16:9) (if the screen size of the Product
is 4:3 or the resolution for the signal input is in wide screen mode, no 4:3 display mode is available for
such key).
< Eco (DCR/i-Care)
Press the Eco key continuously to select the Eco mode of brightness and DCR/I-Care on when there is no
OSD. (Eco mode hot key may not be available in all models).
Source/Auto/Exit
When the OSD is closed, press Source/Auto/Exit button will be auto configure hot key function. When the
OSD is closed, press Source/Auto/Exit button continuously about 3 second to do auto configure (Only for
the models with dual or more inputs).
To Next Page
Loading...
