3
INNI_USER MANUAL_191225PS
※ Please follow safety instructions at all times.
Read the following precautions carefully and familiarize yourself with the INNI 3D Printer User Manual
before setting up and using the printer. Failure to comply with the given warnings can lead to serious injury,
fire, or equipment and/or property damage.
• Make sure that the printer and all accessories are physically intact and free of damage.
• Do not destroy or alter the printer’s power cable. Use the proper voltage (220V) when connecting to a power source.
• Parts of the printer have sharp edges/corners. Be careful to avoid injury or printer damage when using.
• Do not place a foreign object inside the printer as this will incur the risk of injury or property damage.
• Select the installation site carefully to avoid causing injury to children or pets.
• Avoid operating the printer with wet or dirty hands as the introduction of water or other foreign liquid to the printer’s metal
and other conductive surfaces can cause fire or electric shock.
• Do not install the printer outdoors or in an area that is poorly ventilated, humid, or dusty.
• Do not disassemble or alter the printer except as specified in the operation manual since doing so may cause user injury
and/or printer damage. Any such problem will not be covered under warranty.
1. Safety Precautions
To Next Page
Loading...