AON INNI - Included and Optional Accessories

8
Item Product code Item Product code
Scraper
Used to detach the
printed output
AS11-1001P
Modeling bed lm
(10 total)
AS11-1001P
BCM-W500
Zirconia slurry for
INNI 3D Printer use
ACP11-10001Y
Power cable
Main power cord
ACP11-10001Y
Build platform AB11-40000A
Ethernet cable
Used to connect
a computer
to INNI 3D Printer
AB11-40000A
Item Item
Safety glasses
Protection for the eyes
Hex key (2.5mm)
Used to change
the modeling bed film
Latex gloves
Protection for the hands
Sprayer
Used to clean the build
platform/modeling bed
Spatula
Used for mixing
Hex key (3.0mm)
Used to attach/detach
the main door of the printer
Nipper
Used to remove
the support on the printed output
Sieve
Used to filter out residue
* To purchase, please contact AON Call Center at (+82 70 4304 4996).
The following is a list of the accessories included with product purchase. This list is subject to change without notice.
See homepage (http://www.aoninni.com) for additional purchase options.
Additional products (included)
The following is a list of the extra accessories available for INNI 3D Printer.
Accessories (for purchase)
2. Introduction to INNI 3D Printer
2.5mm
3.0mm
Additional Products