25
Option
OSD Language
Sets a language for the OSD menus.
Restore Factory Default
Press "ENTER" after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
Color Range
Adjusts the color range of the HDMI sources.
ECO Mode
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
High Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
Projector Projection
• Front Table: The factory default setting.
• Front Ceiling: When you select this function, the
projector inverts the image for ceiling-mounted
projection.
• Rear Table: When you select this function, the
projector reverses the image so that you can project
behind a translucent screen.
• Rear Ceiling: When you select this function, the
projector reverses and inverts the image at same time.
You can project from behind a translucent screen with
ceiling mounted projection.
Applications
DMP
You can view or play photos, music and video files.
To Next Page
Loading...
Need help?
General
