AP Diving AP50 - Unscrew the Hose Collar from the MP Hose; Use the Hose Cutter to Cut the Hose

AP Diving Ltd. Medium Pressure and Convoluted Hose Shortening Instructions
Page 20 of 38
4.3 Unscrew the hose collar from the MP hose
WARNING: This has a Left Hand Thread, so in order to unscrew it, you need to unscrew
clock-wise, NOT anti-clock-wise!
- Using a 17 mm spanner, unscrew the hose collar from the MP hose
- Unscrew clock-wise.
4.4 Use the hose cutter to cut the hose
- Use the hose cutter to cut the hose to the desired length.
- Use the indication you applied earlier as your guide.
- If you use a knife instead of a hose cutter make every effort to guarantee a “straight”,
90 degree cut.