AP Diving AP50 - 7 Shortening Convoluted Hoses - Old Split Ring Type; Hold the Convoluted Hose End with RBTOOL12 for Better Grip; Unscrew Outer Hose Clamp from Split Inner Hose Clamp Halves

AP Diving Ltd. Medium Pressure and Convoluted Hose Shortening Instructions
Page 33 of 38
7. Shortening convoluted hoses – old split ring type
7.1 Hold the convoluted hose end with RBTOOL12 for better grip
- For better grip while unscrewing the outer hose clamp we recommend using RBTOOL12
or an equivalent tool. This allows e.g. for holding RBTOOL12 in a vice for easy handling.
- Make sure the two slots in the tool slide onto the lips on the inside of the swivel stem.
7.2 Unscrew outer hose clamp from split inner hose clamp halves
- Hold the swivel stem and hose fixed in place while unscrewing the outer hose clamp.
- Unscrew anti-clock-wise.