AP Diving AP50 - Screw the Shortened MP Hose Back into the Hose Collar

AP Diving Ltd. Medium Pressure and Convoluted Hose Shortening Instructions
Page 21 of 38
4.5 Screw the shortened MP hose back into the hose collar
WARNING: This has a Left Hand Thread, so in order to screw the hose in the hose
collar, you need to screw anti-clock-wise, NOT clock-wise!
- Using a 17 mm spanner, screw the hose collar onto the MP hose.
- Screw anti-clock-wise.
- Screw the hose in until the hose JUST touches the shoulder on the inside of the hose
collar.
- Once it touches the shoulder, back the hose out (i.e. unscrew) half a turn, clock-wise.