AP Diving AP50 - Cut the Convoluted Hose to the Desired Length; Push the Convoluted Hose Back Onto the Swivel Stem

AP Diving Ltd. Medium Pressure and Convoluted Hose Shortening Instructions
Page 30 of 38
6.4 Cut the convoluted hose to the desired length
- Preferably use a very sharp pair of scissors.
- Snip or cut into a valley of the convoluted hose, NOT into a rib.
CORRECT: cut into a valley WRONG: cut onto a rib
6.5 Push the convoluted hose back onto the swivel stem
- Push the shortened convoluted hose back onto the swivel stem.
- WARNING: Make sure that the first convolution is pushed OVER the flange of the
swivel stem.