AP Diving AP50 - Page 3

AP Diving Ltd. Medium Pressure and Convoluted Hose Shortening Instructions
Page 3 of 38
7. Shortening convoluted hoses – old split ring type .............................. 33!
7.1 Hold the convoluted hose end with RBTOOL12 for better grip ..................... 33!
.......................................................................................................................... 33!
7.2 Unscrew outer hose clamp from split inner hose clamp halves .................... 33!
7.3 Remove the two split inner hose clamp halves from convoluted hose ......... 34!
7.4 Pull the convoluted hose from the swivel stem ............................................. 34!
7.5 Cut the convoluted hose to the desired length ............................................. 35!
7.6 Push the convoluted hose back onto the swivel stem .................................. 35!
7.7 Refit the two split inner hose clamp halves onto the hose ............................ 36!
7.8 Screw outer hose clamp back onto the split inner hose clamp halves ......... 37!
7.9 Updating the clamping System ..................................................................... 38!
8. Testing Instructions ............................................................................ 38!
8.1 Test for leaks and proper operation .............................................................. 38!
8.2 Visual inspection ........................................................................................... 38!