Apache Labs ANAN-100/D
EXT1, EXT2 or XVTR RX. The receive signal path is then Ant(n), LPF, Bypass, external filter or pre-amp, Ext(n)
or Xvrt RX, HPF, To_RX, then to Hermes/Angelia RX1_in.
EXT1, EXT2, or XVTR RX can be used with an external receive antenna, but TX/RX switching/attenuation must
be provided to protect the receiver from excessive receive levels which could damage the receiver.
Revision v1.8 April 23, 2013 44 of 70 authors N9VV and KC9XG
To Next Page
Loading...
