7.3 Install Software
The instrument uses Turbidimeter PC-Link communication software. It is only compatible with Windows-
based operating system. The communication port is USB. Copy and paste the program files from the
USB drive to the computer. Connect USB cable to the instrument and computer, open Turbidimeter PC-
Link.exe, the instrument will connect with computer automatically. icon will be displayed at the top
of LCD screen. If the instrument cannot connect with computer, please click "Refresh" key or install the
relevant software driver included in the USB drive.
7.4 Run Software
Click Download key, all data in the instrument memory will be sent to the computer. When the program is
running, all measurement information will be sent to the computer via USB. There is no data storage limit
and the data will not be saved in the instrument. In Manual data logging mode, press key after
measurement is completed to save data in the computer; in Auto. data logging mode, data will be
automatically saved in the computer after each measurement is completed. For TruRead
TM
measurement
mode, it will save all the measured values along with maximum, minimum and average values.
7.5 Data Processing
Click Export key to export saved data to a Microsoft Excel document. The data can be further analyzed
and printed.
To Next Page
Loading...
Need help?
General
