Need help?Do you have a question about the Apera Instruments PC60 and is the answer not in the manual?
General| ORP Resolution | 1 mV |
|---|---|
| Conductivity Accuracy | ±1% F.S. |
| TDS Accuracy | ±1% F.S. |
| Salinity Accuracy | ±1% F.S. |
| IP Rating | IP67 |
| Display | LCD with backlight |
| Measurement Parameters | pH, Conductivity, TDS, Salinity, Temperature |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.01 |
| ORP Range | ±1999 mV |
| Conductivity Resolution | 0.01 mS/cm |
| TDS Resolution | 0.01 ppt (g/L) |
| Salinity Resolution | 0.01 ppt (g/L) |
| Temperature Resolution | 0.1 °C (0.1 °F) |
| Temperature Accuracy | ±0.5 °C (±1 °F) |
| Calibration | pH: 1 to 3 points |
| Calibration Points | pH: 4.01, 7.01, 10.01; Conductivity/TDS/Salinity: 1413 µS/cm |
| ATC | Yes |
| Temperature Compensation | Automatic (0 to 60 °C / 32 to 140 °F) |
| Power | AAA Batteries |
| Type | Multi-Parameter Pocket Tester |
| TDS Range | 0 to 10.00 ppt (g/L) |
| Salinity Range | 0 to 10.00 ppt (g/L) |
Details the available parameter settings, codes, and default values for the tester.
Explains the procedure for entering and navigating the parameter setting menu.
Provides guidance on selecting standard pH buffer solutions and other parameter configurations.
To Next Page