Need help?Do you have a question about the Apera Instruments PH910 and is the answer not in the manual?
Lists the primary technical specifications of the meter.
Describes the functions of each button on the keypad.
Provides information about the pH electrode used with the meter.
Step-by-step guide for performing a three-point pH calibration.
Step-by-step guide for customized pH calibration.
Instructions for performing a sample pH measurement.
Step-by-step guide for 1413µS/cm conductivity calibration.
Step-by-step guide for customized conductivity calibration.
Instructions for measuring conductivity of a solution.
Details all available parameter settings and their options.
General| pH Range | -2.00 to 16.00 pH |
|---|---|
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| mV Resolution | 1 mV |
| Temperature Resolution | 0.1°C (0.1°F) |
| Calibration Points | Up to 5 points |
| Temperature Accuracy | ±0.5°C (±1°F) |
| Temperature Compensation | Automatic (0 to 100°C) |
| Data Storage | 500 sets |
| Power Supply | 4 x AAA batteries |
| Display | LCD |
To Next Page