Apogee GiO User Manual

8
GiO by APOGEE – User’s Guide
Connecting a Home Stereo
• Using the included 1/4” TRS to dual RCA cable, connect the 1/4”
TRS plug to GiO’s back panel Output jack. Next, connect the
RCA plugs to your stereo system’s Aux or Tape inputs.
• Set GiO’s output level to maximum, and control the listening
level using the home stereo’s volume control.
Connecting an Instrument Amplier
• To connect to most instrument ampliers, it’s necessary to add
a 1/4 TS to RCA female adaptor to the included cable’s RCA
plugs. Connect the 1/4” TRS plug to GiO’s back panel Output
jack and the RCA plugs (with 1/4” TS adaptors) to the instrument
amp’s inputs. If the amp has one channel, connect the left side of
the cable.
• It’s possible to set GiO’s output level to a xed value, so that it
can’t be inadvertently changed. Open Audio MIDI Setup (or any
of the other control panels listed on page 7), and select the Amp
(or Instrument Amp) setting.

Apogee GiO Specifications

General

Brand	Apogee
Model	GiO
Category	Recording Equipment
Language	English