Need help?Do you have a question about the Apogee Boom and is the answer not in the manual?
General| Connectivity | USB-C |
|---|---|
| Bus Powered | Yes |
| Simultaneous I/O | 2 x 2 |
| Number of Preamps | 1 |
| Software | Apogee Control 2 |
| Type | USB Audio Interface |
| Inputs | 1 x XLR/TRS combo |
| Phantom Power | Yes |
| Headphones | 1 x 1/8" |
| OS Compatibility | macOS, Windows, iOS |
| Outputs | 2 x 1/4" TRS |
Introduces the Apogee Boom and outlines its key features and capabilities.
Explains the structure of the guide and how to find information on components and setup.
Details included items, bundled software, system requirements, and product registration.
Provides a visual guide to the front and rear panel components and connectors.
Steps for installing the Apogee Control 2 software on macOS.
Instructions for installing on Windows 10 and updating the device firmware.
Guides for connecting Boom to a computer or iPad Pro via USB-C.
Steps for connecting Boom to an iOS device using a Lightning connector.
Steps to set up macOS for Boom as the audio interface.
Steps for configuring Windows 10 and Apple iOS for Boom audio I/O.
How to connect studio monitors and headphones to Boom outputs.
Instructions for connecting microphones to the IN1 XLR Combi jack.
Guides for connecting instruments and line-level sources to IN1/IN2.
Explains the function of the control knob and LEDs for gain, output, and DSP status.
Describes how the meters display signal levels for inputs and outputs.
Describes the main interface of the Apogee Control 2 software.
Explains toolbar buttons and system settings sidebar functions.
Details the channel section, general settings, and Analog IN channels.
Covers analog input gain settings and playback channel usage.
Explains the EQ section controls including High Pass, Lo Shelf, and Mid Peak.
Details compressor, drive, output level, and preset management features.
Explains mixer controls like pan, fader, mute, solo, and routing options.
Details output meters and controls for source selection and listening level.
Guides workflow choices and defines key concepts like latency and buffer size.
Explains latency, monitoring types, DSP, and DAW functionalities.
Details the software monitoring workflow, its pros, cons, and configuration.
Details the direct monitoring workflow for low latency mixing.
Explains how to use the onboard ECS Channel Strip for audio processing.
Describes routing the mixer output to software inputs for loopback functionality.
Instructions for configuring Apple Logic Pro for Boom audio I/O.
Instructions for configuring Avid Pro Tools for Boom audio I/O.
Instructions for configuring Ableton Live for Boom audio I/O.
How to assign custom labels to input and output channels in DAWs.
Provides links to support resources like KnowledgeBase and FAQs.
Details technical specs for mic pre, hi-Z, A/D, D/A, and headphone outputs.
Outlines product warranty terms, legal notices, and company policies.
States compliance with FCC, CE, and other regulatory standards.
To Next Page
