EasyManua.ls Logo

Applanix POS MV 320 - User Manual

Default Icon
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Copyright © Applanix Corporation, 2009
POS MV V4 User Guide
PUBS-MAN-000513
Revision 3

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Applanix POS MV 320 and is the answer not in the manual?

Summary

Liability and Safety Information

DECLARATION OF CONFORMITY

Appendices

Technical Support and Service

Information on how to contact Applanix for support, service, and returns.

1.0 Introduction

System Description and Overview

Describes the POS MV system components, versions, and product family models.

2.0 Installation

Handling Precautions

Provides essential guidelines for safely handling POS MV components to prevent damage.

Power and Environmental Requirements

Details power supply recommendations and environmental limits for system components.

Installation Steps

Covers the core procedures for installing system components and initial setup.

3.0 Interfaces and Data Formats

4.0 System Configuration

Power-On and Initialization

Instructions for powering on the POS MV system and initial setup procedures.

MV-POSView Controller Setup

Guides on setting up and using the MV-POSView Controller software.

POS MV Configuration and Calibration

Describes how to input installation parameters and perform automatic calibration.

5.0 System Operation

MV-POSView Controller Program

Guides on operating the POS MV using the MV-POSView Controller software.

Monitoring POS MV Main Window

Explains the main window layout, status panes, and navigation data display.

Faults and Messages

Details how the system reports and indicates faults and error messages.

Data Logging

Instructions for configuring and performing data logging via Ethernet.

Operation with GAMS

Describes the normal operation and troubleshooting of the GNSS Azimuth Measurement Subsystem (GAMS).

6.0 TrueHeave Operation

Data Output and Procedures

Explains how TrueHeave data is output and the procedure to enable the feature.

7.0 Specifications

POS MV Performance Specifications

Details the performance specifications for POS MV models, including accuracy during normal and outage conditions.

8.0 Tools and Diagnostics

Diagnostics Functions

Enables setting and viewing diagnostic values for system debugging.

9.0 Fault Identification

Front Panel Indicators

Explains the status indications provided by the PCS front panel lights.

Fault Detection and Messaging

Details how the system detects, reports, and logs faults and warning messages.

Appendix A: Technical Support and Service

Appendix B: Theory of Operation

Appendix D: Software Installation

MV-POSView Controller Program Installation

Step-by-step instructions for installing the MV-POSView Controller program on a PC.

Firmware Upgrade Procedure

Guidance on upgrading the POS MV embedded firmware using the POS Loader program.

Appendix F: Patch Test

Appendix H: POS-GNSS Timing

Applanix POS MV 320 Specifications

General IconGeneral
Data RateUp to 200 Hz
Operating Temperature-20°C to +55°C
Environmental ProtectionIP67
Heading Accuracy0.02 degrees
Heave Accuracy5 cm or 5% of heave amplitude (whichever is greater)
Gyrocompassing Accuracy0.02 degrees
Input Voltage10 to 36 V DC
InterfacesEthernet, RS-232, CAN

Related product manuals