To Next Page
K
Katrina NguyenSep 12, 2025
Why are the LEDs yellow and red and the Appostar Printer beeping?
- CChristine RobinsonSep 12, 2025
If the LEDs are yellow and red and the Appostar Printer is beeping, it means the paper has ended. Load a new paper roll.
Why are the LEDs yellow and red and the Appostar Printer beeping?
If the LEDs are yellow and red and the Appostar Printer is beeping, it means the paper has ended. Load a new paper roll.
What to do if the compartment cover on my Appostar RTP-3280 doesn't open?
If the compartment cover on your Appostar Printer does not open after pressing the Open button, the cutter blade might not be positioned correctly. Move the cutter blade back to its normal position.
Equipment compliance with FCC regulations for digital devices.
Proper disposal of electronic waste according to WEEE directive.
Information is subject to change; no liability for errors or damages.
Identifies and describes external and internal components of the printer.
Guidance on selecting an appropriate place for printer installation.
Instructions for establishing a connection via serial or USB interface.
Steps for connecting one or two cash drawers to the printer.
Procedures for safely connecting the printer to a power source.
How to power the printer on and off using the power button.
Step-by-step guide on inserting a new paper roll into the printer.
Instructions for printing a test label to verify printer functionality.
Explains operation of key buttons like Power, Open, and Feed.
Detailed instructions for changing the paper roll.
How to adjust the sensor for accurate paper end detection.
Procedures for resolving paper jams and their causes.
Guide to configuring printer settings via DIP switches.
Table showing ASCII characters for the US standard.
Tables detailing character sets for various international regions.
List of available code pages and their corresponding languages.
Instructions for cleaning the critical print head component.
Guidance on cleaning the paper cutter mechanism.
Steps for cleaning internal parts like the platen roller.
How to clean the exterior casing of the printer.
Explains LED indicators and beep codes for diagnosing issues.
Addresses common printing problems like paper feed or quality issues.
Technical details on printing method, speed, driver, and character structure.
Details required paper type, size, and thickness for optimal printing.
Overview of printer versions and Ethernet interface functionality.
Steps for setting up hardware and software for network connectivity.
Physical connection instructions using an RJ-45 Ethernet cable.
Configuration of IP address, ID, and password for network operation.
Procedures for accessing and modifying network settings via a web browser.
Methods for sending print data using TCP/IP or virtual COM ports.
Steps to add a standard TCP/IP port in Windows for printer driver.
Guide to installing and using the VCOM tool to create virtual COM ports.
Details on configuring and creating a virtual COM port mapping.
Table detailing pin numbers, signals, I/O, transmission, and function.
Diagram and pinout for connecting the printer via a serial cable.
General