Aprilaire 8800 - Page 30

PIN
Security pin code COS: N/A
Permissions: Read/Write
Query
Command
Syntax: SN[#] PIN?<CR>
Description: Requests the security pin code.
Assignment
Command
Syntax: SN[#] PIN=[value]<CR>
Description: Sets the security pin code to [value].
Examples: SN1 PIN=1234<CR>
SN2 PIN=OFF<CR>
Response Syntax: SN[#] PIN=[value]<CR>
Example: SN1 PIN=1234<CR>
Node address 1 responds with a security pin code of 1234.
Parameters Range
value: 4-digit pin [OFF, 0000 – 9999]
Default: OFF
If an assignment command is received with a value other than OFF, security is automatically enabled. If the value is OFF, security is disabled
and the security pin is not required for security restricted features.
The security pin code can be configured through the Installer Setup Screens.
30