Aptiv IC-CPD - ICCB Internal Operations; Ground Monitoring and Circuit Protection; Self-Test and Temperature Management

To Next Page

To Previous Page

User Manual – Electric Vehicle Charging Equipment IC-CPD

Version 1.0 / 1906

Type

ICCB:

• IEC 61851-1 Electric vehicle

conductive charging system –

Part 1: General requirements

• Ground monitoring

• Depending on the equipment, the

ICCB measures the protective

conductor resistance and stops

the charging process if the

measured value is too high

• Charging circuit breaker

PRCD-S (protection device against

electric shock)

• Detects fault currents and disables

the charging process

• A self-test that avoids the need

of a monthly review after power-up

and before each charging cycle

• Charging circuit breaker ON/OFF

• Permits the charging process to be

resumed after certain errors and a

waiting period of 5 minutes

• If the error has been corrected, no

user intervention is required

• Temperature monitoring

• The ICCB continually monitors the

temperature inside the box and

thus prevents overheating under

certain conditions

CHARGING

TEMPERATURE

POWER

FAULT