14 Aquatic Industries, Inc.
Warning - Prolonged Immersions in Hotter Water May Induce Hyperthermia.
Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body
temperature of 98.6
o
INSTALLATION INSTRUCTIONS
CHROMATHERAPY LED LIGHTING:
ELECTRICAL INSTALLATION (continued):
TROUBLESHOOTING GUIDE for UNDERWATER CHROMATHERAPY:
All Infinity models now come equipped with a digital color-changing underwater light for soothing chromatherapy. To
desired effects.
To Turn Your Chromatherapy Lighting System ON: Press the Light Button once to turn the Chromatherapy Light
ON in Color Wash mode. A second press of the button will turn the lighting system OFF. Subsequent presses will move
the lighting system through the seven constant color modes.
Color Wash: Random color blend
Off
White: clarity
Off
Aqua: Calm
Off
Violet: Inspiration
Off
Blue: Peace
Off
Yellow: Hope
Off
Green: Harmony
Off
Red: Courage
5A
Lens Install &
Removal Tools
To replace bulb:
1. Disconnect the power to your bathtub.
2. Drain the bathtub.
3. Open the lens of the fixture using ONLY the proper tool provided
for that purpose (see Diagram 5A). Do not attempt to remove the
lens without the provided tool.
4. Replace your LED light (replacement LED lights can be obtained
from Aquatic Industries).
groove when replacing the lens. If there is damage or lens does
NOTE: Do not twist LED light into socket. Use gentle pressure and
push LED light into place.
Lens &
Wall Fitting
Bulb
Socket
To Next Page
