16 Aquatic Industries, Inc.
INFINITY AIR BATH CONTROL (SEE DIAGRAM 6C):
1. To Turn Air Bath System On: Pressing the On/Off button will turn
second time will turn the blower off. The light indicator will illuminate when
the system is on. The blower and the blower heater will automatically
shut off after a 20-minute period.
2. To Change Modes: Pressing the Mode button alternates the
blower modes of operation from constant mode to wave mode and
then to pulse mode.
intensity set by the user.
will also follow the blower intensity.
will also pulse as the blower does.
OPERATION of
INFINITY SERIES WHIRLPOOLS
INFINITY JET SEQUENCER CONTROL (SEE DIAGRAM 6B):
1. To Turn Jet Sequencer On:
Note:
2. To Choose Sequences:
sequences. Note: only the first 6 sequences have corresponding
indicator lights. The remaining sequences do not have indicator lights.
A preview of the massage is displayed for 5 seconds after selecting
a sequence.
3. To Change Speeds:
interval between each step of the selected massage sequence.
Speed 1: 15 Seconds between each step.
Speed 2: 10 Seconds between each step.
Speed 3: 5 Seconds between each step.
4. To Pause:
Other Features:
water from the pipes.
BATHSIDE CONTROL SYSTEMS (continued):
6C
6B
To Next Page
Loading...
