Aquatic Industries, Inc. 17
OPERATION of
INFINITY SERIES WHIRLPOOLS
BATHSIDE CONTROL SYSTEMS (continued):
INFINITY AIR BATH PURGE CYCLE (SEE DIAGRAM 6C, PAGE 16):
PURGE 24 HOURS
It is possible for the user to program a purge cycle that will start every day for a duration of 1 minute. Aquatic strongly
recommends activating this feature. The purge cycle will help ensure that the air channels stay dry even when you have
taken a soaking bath or shower.
different blinking rate was picked in order to make it easier for the user to differentiate it from the standby of the regular
purge cycle.
turn off.
INFINITY AIR BATH CONTROL (SEE DIAGRAM 6C, PAGE 16) (continued):
3. To Change Speeds:
and pulse mode.
To Next Page
Loading...
