Flushing the Filter
STEP 1
There is no danger in drinking the water with the carbon residue
discoloring the liquid, however for the freshest tasting and looking
water it is beneficial to flush the system.
NOTE
STEP 2
Begin Using Your Cooler
WARNING: YOU MUST OBSERVE ALL LOCAL GOVERNING CODES AND ORDINANCES
You must flush water through the filter to wash excess carbon out before
drinking (this is commonly referred to as priming the filter, and is
required)
To do this please flush two gallons (approximately 10 glasses of water)
through the cooler until the water is clear in color
You may begin to use the cooler immediately however it can take approximately 1 hour for the cold
tank, and hot tank to take effect and chill or heat the water in your cooler
To Next Page
Loading...
