28/02/2020 Page 4 of 41 ARB Copyright 2018 3789452
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office ā ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
And Qty 1 Carton containing hardware (Part no 6173952) which contains the following:
FOAM ANTI RATTLE 30MMX150MM STRIPS
FRONT TUB CONER SEAL BRIDGE
PAIR OF DIE CUT BLACK STICKERS
ROLL - SOFT FOAM 2MM THICK X 26MM WIDE X 1.65
METERS
M6X20MM BLACK HEX HEAD SCREWS GD 8.8
M6 X 25MM X 2.8MM THICK BLACK FLAT WASHERS
M6 WIZZLOCK FLANGE NUTS - BLACK
M8 X 25 TORX PAN HEAD SCREW - BLACK
M8 X 25.4MM X 3MM THICK BLACK FLAT WASHERS
M8 X 20MM X 2MM THICK BLACK FLAT WASHERS
RIVET POP 3/16" DIA GRIP 4.8-11.1
ROLL- CLEAR TAILGATE PROTECTION TAPE 30MM
WIDE
ELECTRICAL LOOM- VEHICLE HARNESS
2. TUB MOUNT BRACKETS IN
CARTON
RH- FRONT CORNER TUB MOUNTING BRACKET
LH- FRONT CORNER TUB MOUNTING BRACKET
RH- REAR TUB MOUNTING BRACKET
LH- REAR TUB MOUNTING BRACKET