Arbiter Systems 1093B User Manual

Appendix C
Options List
C.1 Introduction
Each Arbiter Model 1092A/B/C and 1093A/B/C Satellite-Controlled Clock has a number of stan-
dard options that may be installed for special purposes. This section is devoted to these options,
and provides supplemental and detailed information for operation and configuration of these op-
tions. While many of these options apply to other clock models than the Model 1092A/B/C and
1093A/B/C, references to these models will be found throughout this document.
Additionally, there will be references to certain capabilities and specifications that apply only
to specific clock models when using these options. For example, with Option 03, there will be a
large list of possible signals that can be selected with the option board jumpers. Many of these
signals do not apply to the Model 1092A/B/C and 1093A/B/C series clocks because the signals do
not originate on the main clock board. The key to usage is to check the basic specification of the
clock to determine the option capability.

Arbiter Systems 1093B Specifications

General

Brand	Arbiter Systems
Model	1093B
Category	Measuring Instruments
Language	English