Arbiter Systems 1093B User Manual

C.15 Option 34: NTP/PTP Server 157
Useful Keys for Console Navigation
Arrow Keys – navigate up, down, left, and right
Enter – accept the current selection
SPACE – accept the current selection except in edit fields (same as Enter)
Tab – cancel an edit/change
Q or q – select the Logout menu item
Use the cursor keys to navigate the console elements.
System Configure Page
Figure C.32 illustrates the System configuration page for Option 34. It includes configuring for
HTTP or HTTPS (see next section), enabling session time outs for the web interface and console,
responding to ping requests and setting your time zone. Time zone setting only changes the time
as it is read on the clock display. Just as the receiving device must convert the NTP/PTP time as
it arrives at the device to local time zone, so the clock can display local time.
Status| [Configure] | Password | Update | Reboot
Web Interface
( )HTTP (*)HTTPS Port[443 ]
PEM File Download Replace
[ ] Enable Session Timeout
Console Interface
[ ] Enable Session Timeout
Miscellaneous
[X] Respond to Ping Requests
Time Zone Setting [PST8PDT7]
Apply Reset
ARBITER
SYSTEMS
Option 34 Network Time Module
NTP
PTP
SNMP
Clock
Network
[System]
Support
Logout
Computer Name (or IP address) – ssh – 80x24
Figure C.32: System Configure Page Using SSH
Configure HTTPS Page
To configure the HTTPS page you must use the Web Interface. For more information see Sec-
tion C.15.3.

Arbiter Systems 1093B Specifications

General

Brand	Arbiter Systems
Model	1093B
Category	Measuring Instruments
Language	English