Contents
1 Unpacking the Clock 1
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Unpacking and Locating Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.4 Attaching Rack-Mount Ears to 1093A/B/C Series Clocks . . . . . . . . . . . . . . . 2
1.4.1 Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.4.2 Rack-Mount Ears for Model 1092A/B/C Series Clocks . . . . . . . . . . . . . 3
2 Front and Rear Panels 4
2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Front Panel Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2.1 Command Key Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2.2 LED Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2.3 LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2.4 Enabling and Disabling the Keypad and Display . . . . . . . . . . . . . . . . 6
2.3 Rear Panel Identification and Connectors . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.1 Power Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.2 Antenna Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3.3 Event Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3.4 RS-232 and RS-485 Communication Ports . . . . . . . . . . . . . . . . . . . . 8
2.3.5 Form C, Relay Contacts – Option 93 . . . . . . . . . . . . . . . . . . . . . . . 9
2.3.6 Standard Inputs/Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Connecting Inlet Power, Input and Output Signals 10
3.1 Option 07, IEC-320 Power Inlet Module . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1.1 Cordsets and Plug Styles for Option 07 . . . . . . . . . . . . . . . . . . . . . 10
3.1.2 Option 07, Connecting Power to the 1093B . . . . . . . . . . . . . . . . . . . 10
3.2 Option 08, 10 to 60 VDC Terminal Power Strip . . . . . . . . . . . . . . . . . . . . . 11
3.2.1 Option 08, Connecting Inlet Power . . . . . . . . . . . . . . . . . . . . . . . . 11
3.3 Option 10, 110 to 350 VDC Terminal Power Strip . . . . . . . . . . . . . . . . . . . 11
3.3.1 Option 10, Connecting Inlet Power . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4 Fuse Locations and Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4.1 Replacing Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.5 Connecting Output Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.6 Connecting Input Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13