EasyManua.ls Logo

Arcam AVR550 - AVR390 Technical Specifications; AVR390 Performance Specifications

Arcam AVR550
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-45
English
AVR390
Continuous power output, per channel, 8
2 channels driven, 20Hz - 20kHz, <0.02% THD 80W
2 channels driven, 1kHz, 0.2% THD 86W
7 channels driven, 1kHz, 0.2% THD 60W
Residual noise & hum (A-wtd) <0.15mV
Stereo line inputs
Maximum input 4.5V rms
Nominal sensitivity 1V, 2V, 4V (user adjustable)
Input impedance 47kΩ
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct 100dB/110dB
Frequency response 20Hz—20kHz ± 0.2dB
Preamplier outputs
Nominal output level 1V RMS
Output impedance 560Ω
THD+N (20Hz—20kHz) -100dB
Headphone output
Maximum output level into 32Ω 2Vrms
Output impedance <5Ω
General
Mains voltage 110–120V or 220–240V, 50 –60Hz
Power consumption (maximum) 1.5kW (ermal dissipation approx. 5200 BTU/hour)
Power consumption (idle, typical) 100W (ermal dissipation approx. 340 BTU/hour)
Power consumption (standby) <0.5W
Dimensions
W x D (including speaker terminals) x H (including feet)
433 x 425 x 171mm
Weight (net) 15.7kg
Weight (packed) 19.9kg
Supplied accessories Mains lead
Remote control
2 x AAA batteries
Manual
DAB/FM aerial
Calibration microphone
USB sound card
E&OE
NOTE: All specication values are typical unless otherwise stated.

Table of Contents

Other manuals for Arcam AVR550

Related product manuals