What to do if there is gas output but no current when pushing the torch trigger on ARCCAPTAIN Welding System?
If, when the torch trigger is pushed, there is gas output, but there is no output current, and the alarm indicator does not illuminate on your ARCCAPTAIN Welding System, it indicates that the torch trigger has failed. You should repair or replace the welding torch.
Guidance on how to effectively read and understand the user manual for safe operation.
Overview of the MIG130 welder's features, including its SYNERGIC SET function.
Explanation of the welding power source's rated duty cycle and its implications for operation.
Guidelines for selecting a suitable environment and location for operating the welding machine safely.
Instructions for connecting the welding machine to the appropriate power source, including voltage requirements.
Description of the machine's features, including front panel, back panel, and operation interface layouts.
Step-by-step guide for setting up the MIG welder for gas-less flux-cored wire welding.
Explanation of Flux Cored Arc Welding (FCAW) technique, adjustable variables, and making weld beads.
Fundamentals of MIG welding, covering gun position, travel direction, and basic setup.
Details on optimal travel speed for welding, including effects of too fast or too slow speeds.
Instructions for installing MMA and TIG welding torches and setting up the machine for these processes.
Critical safety precautions to be observed before performing any maintenance on the welding machine.
Procedures for daily checking and cleaning of the welding machine and its components for optimal performance.
Guidelines for periodic inspections by qualified professionals to ensure long-term safe operation.
General| Brand | ARCCAPTAIN |
|---|---|
| Model | MIG130 |
| Category | Welding System |
| Language | English |
To Next Page
