DIVISION II - OPERATION/
MAINTENANCE
35
Previous Main Table of Contents Section Table of Contents Next
ATV Operation
NOTE: After riding through water, mud, snow, or slush, it
is important to dry the brake system before parking the ATV.
4. Practice driving in an open snow-covered or ice-covered area at
slow speeds before driving on snow-covered or ice-covered
trails.
5. Learn how the ATV responds to steering and braking on the type
of terrain to be encountered on the ride.
Stopping The ATV
To stop the ATV, first release the throttle lever. Next, apply the brake.
Stopping The Engine
To stop the engine, turn the ignition switch key to the OFF position or
set the engine stop switch to the OFF position.
! WARNING
Go slowly and be extra careful when riding on snow-covered
or ice-covered terrain. Always be alert to changing terrain
conditions when operating the ATV.
To Next Page
Loading...
