42
Previous Main TOC Section TOC Next
ATV- 20 4
1. Stop where you are, apply the brakes,
and shift to neutral.
2. Shut off the engine.
3. Keep your body weight shifted for-
ward.
4. Get off the ATV on the uphill side.
5. If you’re to the left of the ATV, turn
the handlebar all the way left.
6. Partially release the brake, but lightly
hold the brake lever.
7. Let the ATV roll to your right side
until it faces slightly downhill.
8. Reapply the brakes.
9. Get back on the ATV from the uphill
side, and keep your weight shifted
uphill when you sit down.
10. Start the engine and follow the
method for riding downhill.
Riding Uphill
Roughly 20% of accidents happen while
riding on hills and as a result of the ATV
rolling or flipping. So, obviously, use
extreme caution and follow this method
for riding uphill.
ATV-0019
ATV-0032
ATV-0033
1. Shift down and accelerate before you
start climbing; then maintain a steady
pace.
To Next Page
Loading...
