EasyManua.ls Logo

AREA iCOOL 4.5MHP - Регулярные Осмотры; Regular Inspections of the Installation

AREA iCOOL 4.5MHP
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
v.18-12.01
Area Cooling Solutions Sp. z o.o. Ul. Relaksowa 27
55-080 Nowa Wieś Wrocławska
Ukraine phone/fax +38 044 411 42 38
TEHNOHOL LCC
33/49
14.2. Регулярные осмотры / Regular inspections of the
installation
Раз в месяц /
Once a month
- Проверьте давление на стороне нагнетания / Check the pressure at the discharge side
- Проверьте давление на стороне всасывания ния / Check the pressure at the suction side
- Проверьте температуру всасываемого газа / Check the temperature of sucked vapour
- Проверьте температуру газа на стороне нагнетания / Check the temperature of vapour at
the discharge side
- Проверьте температуру картера / Check the crankcase temperature
- Проверьте перегрев паров хладагента / Check the vapour superheating
- Проверьте уровень масла и долейте его при необходимости / Check the oil level and
refill it if necessary
- Проверьте токи двигателя компрессора / Check the current drawn by compressors'
motors
- Проверьте чистоту конденсатора / Check the cleanliness of the condenser
- Проверьте индикатор влажности системы / Check the moisture level in the system
- Проверьте состояние гибких соединений / Check the condition of flexible couplings
- Проверьте на утечки хладагента / Check the refrigerant leaks
- Проверьте испарители на наличие льда / Check if the coolers are not blocked by ice
Раз в 6 месяцев /
Once in 6 months
- Проверка предохранительных клапанов / Certification of safety valves
- Проверка состояния поддонов испарителей / Checking the condition of evaporators'
drip trays
- Проверка состояния трубопроводов конденсата / Checking the condition of pipelines of
a condensate
- Проверка состояния конденсаторов (особенно их чистоту) / Checking the condition of
condensers (particularly their cleanliness)
Раз в 12 месяцев /
Once in 12 months
- Очистить конденсатор / Clean the condenser
- Проанализируйте состав масла / Analyse the oil composition
- Очистите испарители / Clean the plate and shell and tube evaporators
- Проверьте работу обратных и электромагнитных клапанов / Check the operation of
check and solenoid valves
- Проверьте падение давления на всасывающем фильтре / Check the pressure drop at
the suction filter
В случае обнаружения каких-либо нарушений
предпримите соответствующие шаги для их
устранения. Рекомендуется подготовить форму для
заполнения во время периодических проверок,
ремонта, наладки и технического обслуживания.
In case any irregularities are noticed, take
appropriate steps to address them. It is
recommended to prepare a form to be filled in
during the periodic inspections, repairs,
adjustment and maintenance.

Table of Contents

Related product manuals